What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 02:01
There are three different concepts here that are getting confused.
The bolt then partially travels down the line to your home.
Edit 2024–10.
What does it mean to you to live a life that reflects biblical values?
There are two important concepts here.
One is “what exactly is in a ‘surge protector’ ? ”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
'Zombie' Fungus Caught Bursting From Host Bodies 99 Million Years Ago - ScienceAlert
[old diagram got deleted by accident]
Here is a simplified AC power diagram.
He then asserts :
Why do some films seem to date/age so badly?
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
[image of Common-mode choke]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is 'the assistant's answer'
(Dc diagram shown, AC is similar).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–14 [Omar Gharbi Omar Gharbi ]
but this device (an Inductor) … impedes the rapid changes in the current.
Video: 27 Exciting New Games Coming To Nintendo Switch 1 & 2 In June 2025 - nintendolife.com
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Because the load is inductive, the current lags the voltage.(by a bit).
The third is lightning and “how it gets conducted into a home.”
How can someone effectively handle a targeted individual?
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Apple Is About to Upgrade Your Current AirPods with Some Neat New Abilities - Gear Patrol
First Sentence:
but I think this circuit , shows a few more pieces.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Google can now generate a fake AI podcast of your search results - Ars Technica
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But it can get overloaded, and no longer works.
Meet the 35,000-Ton Organism That Could Be the Largest on Earth - Indian Defence Review
2024–10–16 [ OO OLAOYE OYEBODE ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Marchand, Bennett, Ekblad want to remain with Panthers, aim for Stanley Cup 3-peat - NHL.com
Now when you have a certain ac resistance, then a current flows in a loop.
In schematic diagrams this is the symbol for a fuse:
What does a fuse do?
Why are 'romantasy' books suddenly everywhere, and what does this say about today's readers?
Barnstars:
It seems Mohan does not understand the difference between a comment and an Answer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At one ohm, the resistor has a maximum of 1 watt power.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
These devices are installed between the “hot” and “neutral” and protective ground.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But… the neutral is now “floating” because of the 1 ohm resistance.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, what happens?
The MOV will conduct when the voltage exceeds 50% of line voltage.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A fuse is a non-resetable over current circuit protector.
At least they know the answer if they wanted it.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
eight
the problem then depends on "how fast does the fuse operate?".
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
A circuit breaker is similar, but is resettable.
This device then solves the entire problem.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It also is a device that limits the change in current flow.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is lightning?
what exactly is a ‘surge’ protector?
a photo is worth a thousand words.
nine
This one hit behind the barn.
I post the exact comment here.
Upvotes:
An AC voltage/ current source, and an ac inductive load.
One
This is where the MOV conducts again, and dissipated the energy.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The other is “what does a “fuse” do?”